Seasonal maintenance: Spars<\/p>\n
BY ADMIN \u2022 MAY 4, 2015 \u2022 NEWS, YACHT MAINTENANCE \u2022 COMMENTS OFF \u2022 55<\/p>\n
It\u2019s all too easy to assume the mast, boom, spinnaker pole and, where fitted, rigid vang of a yacht are items with an almost infinite lifespan. Granted, at some stage many owners will opt to maintain the cosmetic appearance with a comprehensive paint system.<\/p>\n
If you opt for this route don\u2019t be tempted by a quick paint job as these invariably do not last well. In any case, given the expense in removing the rig, surface preparation, masking and so on, it\u2019s always worth the extra up front investment to do the job properly, including proper etch primers and decent epoxy based paints.<\/p>\n
However, the bigger concern with spars is a structural one, with the key issue being corrosion that can happen with few, if any, external indications. The problem here is with the many stainless steel fittings that are riveted to the typical aluminium mast or boom. These two metals are relatively far apart on the galvanic scale, meaning that there\u2019s lots of potential for corrosion if they are not kept apart electrically. Unfortunately it\u2019s the alloy of which the spars are constructed that will fizz away.<\/p>\n
Keep an eye open for any white powder forming around fittings that are attached to the spar. This powder \u2013 it\u2019s basically aluminium oxide \u2013 is a product of corrosion and you can be assured that, if the fitting is removed, a much greater area than expected will be damaged.<\/p>\n
If there\u2019s any risk of the structural integrity of the spar having been damaged it\u2019s vital to have it professionally inspected as soon as possible. In many cases even quite advanced damage can be successfully repaired through welding or internally sleeving the spar in the damaged area.<\/p>\n
If you add any new fittings to the mast it\u2019s important that they are not in direct contact with the spar \u2013 monel rivets should be used and the fitting should ideally be separated from the spar with a plastic shield. Failing that a barium chromate or zinc chromate paste such as Duralac will help to keep the two metals isolated.<\/p>\n
<\/p>\n
RECENT POSTS<\/p>\n
Destination: New York City<\/p>\n
First Oyster 118 due 2017<\/p>\n
Portsmouth to host America\u2019s Cup<\/p>\n
Seasonal maintenance: Spars<\/p>\n
Swan 80RS \u2013 Fast Elegant Cruiser<\/p>\n
Water Water everywhere but not a drop to drink.<\/p>\n
Seasonal maintenance: Standing rigging<\/p>\n
Williams wins record fifth world championship<\/p>\n
RORC Caribbean 600 race record tumbles<\/p>\n
Comfortable and Stylish Leopard 58<\/p>\n
via Seasonal maintenance: Spars | Yachting News Report | The Business of Boat Ownership and Marina Berths<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" Seasonal maintenance: Spars BY ADMIN \u2022 MAY 4, 2015 \u2022 NEWS, YACHT MAINTENANCE \u2022 COMMENTS OFF \u2022 55 It\u2019s all too easy to assume the mast, boom, spinnaker pole and, where fitted, rigid vang of a yacht are items with … Continue reading